Wisconsin Solar Design: Greenhouses

Direct Sales

Wisconsin Solar Design Catalog Sales
Greenhouse Benches

Purchasing procedure:
1. Submit purchase order request form below itemizing selections, quantities and cost of desired purchase with phone numbers and shipping address.
2. A Wisconsin Solar Design representative will contact you for prepayment and other information as needed to complete the sale.

PLANTING BENCHES
Standard sizes and specifications

Specifications

1. Benches are constructed entirely of solid IPE (pronounced e-pay) - Tabebuia Serratifolia - a South American hardwood that is 3 times harder than oak. Due to its hardness and natural ability to resist decay, IPE provides superior service when used for greenhouse benches, patios, piers/boat docks, outdoor furniture, walkways and decking.
2. IPE comes from forests that meet the international environmental standards of the Forest Stewardship Council (FSC) for sustainable growth and is sold as a certified product.
3. Benches are sanded and finished with teak oil. End grains are waxed.
4. The table height is 30".
5. Corners posts are constructed of 2 1/2" square (finished size), sides 5 1/2" x 1", tabletop 5 1/2" x 3/4".
6. Bench has feet consisting of 3/8" diameter leveling mounts with nylon glides and t-bolt receptors.
7. Benches are joined with stainless steel cross-dowel recessed corner connectors.
8. Optional two-shelf bench stand as shown in the photo above with wet location lamps mounted below the shelves consisting of two-tube fluorescent fixtures with a sealed acrylic lens and reinforced fiberglass body.
9. Benches are manufactured entirely by Wisconsin Solar Design, Middleton, WI, USA.
10. Benches are shipped fabricated and pre-assembled, knocked-down and bundled, ready for assembly.

Size and model number	Approximate shipping weight per bench with shelves, lbs.	Cost including crating and shipping (add sales tax for WI shipments) within the continental lower 48 states (inquire for other shipping rates) for quantities:
Size and model number	Approximate shipping weight per bench with shelves, lbs.	1	2	3	Each additional bench	Add for shelves, each bench
2'-6” x 2'-6”, 2062062362	200	$1,336	$2,472	$3,608	$1,036	$575
2'-6” x 3'-0”, 2063002362	250	$1,536	$2,872	$4,208	$1,236	$625
2'-6” x 3'-6”, 2063062362	300	$1,736	$3,272	$4,808	$1,436	$725
2'-6” x 4'-0”, 2064002362	350	$1,936	$3,672	$5,408	$1,636	$775
2'-6” x 4'-6”, 2064062362	400	$2,136	$4,072	$6,008	$1,836	$825
2'-6” x 5'-0”, 2065002362	450	$2,336	$4,472	$6,608	$2,036	$875
2'-6” x 5'-6”, 2065062362	500	$2,536	$4,872	$7,208	$2,236	$925
2'-6” x 6'-0”, 2066002362	550	$2,736	$5,272	$7,808	$2,436	$975
2'-6” x 6'-6”, 2066062362	600	$2,936	$5,672	$8,408	$2,636	$1025
2'-6” x 7'-0”, 2067002362	650	$3,136	$6,072	$9,008	$2,836	$1075

Please contact Wisconsin Solar Design for sizes and specifications other than those listed above.

Purchase Order Form

Wisconsin Solar Design
6349 Briarcliff Ln.
Middleton, WI 53562
Phone (608) 831-2112
Fax (608) 836-5933

(*= required for submission)

<% For each x in Request.Form message=message & x &:" & Request.Form (x) & CHR(10) Next set smtp=Server.CreateObject("Bamboo.SMTP) smtp.Server="mail.wisconsinsolardesign.com" smtp.Rcpt="info@wisconsinsolardesign.com" smtp.Message=message on error resume next smtp.Send if err then response.Write err.Description else response.Write ("Thank your for your submission. Your message has been delivered successfully.") end if set smtp = Nothing %>

First Name:*	Last Name:*
Phone:*	Fax:
Email:*	Company:
Name of Project:

Complete Shipping Address, indicate if same:

Name:

Street Address:

City, State, Zip:

Complete Billing Address: *

Name:

Street Address:

City, State, Zip:

Enter Information about your Bench Purchase:

Size and model number:

Quantity:

Cost including crating and shipping Quantity
(add sales tax for WI shipments) :

For validation, please enter any 4 digit number:*

Special Instructions: